30 lines
1.5 KiB
Markdown
30 lines
1.5 KiB
Markdown
|
(THE PCB)[!../doc/audioMux-brd.svg]
|
||
|
|
|
||
|
|
There are a total of six solderjumpers on the board:
|
||
|
|
|
||
|
|
# switching to the barrel jack as voltage supply
|
||
|
|
|
||
|
|
*JP3* and *JP4* set the source for the supply voltage.
|
||
|
|
*JP4* connects the voltage input to the barrel jack, *JP4* connects it to the USB +5V rail.
|
||
|
|
|
||
|
|
Per Default JP4 is closed and JP3 is open, making the default way of supplying voltage the USB jack.
|
||
|
|
|
||
|
|
If the Barrel Jack should be used, then **JP4 has to be opened first** by cutting the trace which shorts it by default, otherwise **the USB voltage will be shorted with the barrel jack, causing potential damage to the USB port**.
|
||
|
|
Afterwards, *JP3* can be closed with a small blob of solder.
|
||
|
|
|
||
|
|
# activating the equalizer on
|
||
|
|
|
||
|
|
*JP1* and *JP2* connect the output of the Audio switching part of the Rohm chip.
|
||
|
|
When left in the default setting, they will connect them to the output jack directly, bypassing the Equalisation part of the chip completely.
|
||
|
|
|
||
|
|
By selecting the other possible path, the equalisation circuit becomes usable. For this to work,
|
||
|
|
*JP7* and *JP8* have to be closed with small solder blobs as well, since those connect the equalizers
|
||
|
|
output to the output audio jack.
|
||
|
|
|
||
|
|
# Assembling the rest
|
||
|
|
|
||
|
|
For assembly of the board, check the (documentation folder)[../doc]. It contains the (interactive bill of materials)[../doc/interactive_placement.html],
|
||
|
|
which indicates what components go where.
|
||
|
|
|
||
|
|
Also take a look at the (BOM)[../doc/BOM.xlsx] for what components can be sourced where.
|