julixau/audioMux
1
0
Fork 0
Code Issues 3 Pull Requests Releases 1 Wiki Activity

add serial protocol doc to readme

Browse Source
This commit is contained in:
Julian Daube 2019-10-21 13:09:09 +02:00
parent 41ee7ab012
commit 92ba23f1cd
1 changed files with 9 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
README.md
View File

@ -11,4 +11,13 @@ Sometimes you just need more inputs. And this is how you do it.
The BD3491 does all the audio switching. It combines one 6 input switch and an equalizer into a simple package.
The STM32 configures the BD3491 to switch to the specified inputs based on pressed buttons or software control.
# serial control Syntax
The stm32 will register to the PCB as a new Serial Port. The following text commands can be send:
- `C[number]\n` will change the input to the specified channel. The stm32 echo the command as it was understood. e.g: When Sending `C0\n` it will respond `C0\r\n` to acknowledge the channel switched to **Input 1**. When issuing a `C10` there will be no response, since 10 is out of range. *NOTE:* when using the buttons on the PCB to switch the input, the stm will also issue a `C[number]\r\n` over the serial port if it is connected to notify the PCB of the external input change.
- `G[number]\n` will activate an input gain of [number] in dB. It will also respond with the closest gain it can do. e.g: `G10` will result in the stm responding `G12\r\n` which means it will add a 12db input boost, which was the closest matching _valid_ input gain value. You can check the datasheet of the BD3491 to find the possible gain values if this peaks your interest :)
- `L[number]\n` or `R[number]\n` will activate an attenuator in either the left or the right channel. [number] is once again in dB. It works much like the `G`-command. Setting [number] to 0 will deactivate the Attenuation.