audioMux/firmware/Include/usbd_core.h
Julian Daube 41ee7ab012 firmware: completed
firmware accepts commands over usb and
switches inputs based on button presses
2019-10-20 19:18:52 +02:00

168 lines
5.3 KiB
C

/**
******************************************************************************
* @file usbd_core.h
* @author MCD Application Team
* @version V2.4.2
* @date 11-December-2015
* @brief Header file for usbd_core.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CORE_H
#define __USBD_CORE_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
#include "usbd_def.h"
#include "usbd_ioreq.h"
#include "usbd_ctlreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CORE
* @brief This file is the Header file for usbd_core.c file
* @{
*/
/** @defgroup USBD_CORE_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Variables
* @{
*/
#define USBD_SOF USBD_LL_SOF
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
/* USBD Low Level Driver */
USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t ep_type,
uint16_t ep_mps);
USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t size);
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t size);
uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
void USBD_LL_Delay (uint32_t Delay);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBD_CORE_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/