2019-10-23 23:28:22 +02:00
[render image ](doc/images/render.png )
2019-07-28 17:30:24 +02:00
2019-10-23 23:24:33 +02:00
< iframe src = "https://myhub.autodesk360.com/ue28af833/shares/public/SH56a43QTfd62c1cd96847154d5ed1f7a373?mode=embed" width = "640" height = "480" allowfullscreen = "true" webkitallowfullscreen = "true" mozallowfullscreen = "true" frameborder = "0" > < / iframe >
2019-07-28 17:30:24 +02:00
2019-10-23 23:24:33 +02:00
This project contains all design files for a **6:1 audio multiplexer** , meaning it can switch six analog inputs into one analog output.
2019-07-28 17:30:24 +02:00
2019-10-23 23:24:33 +02:00
It is based on the [BD3491 ](https://www.digikey.de/product-detail/de/rohm-semiconductor/BD3491FS-E2/BD3491FS-E2TR-ND/5720882 ) which does everthing related to the Audio signals.
2019-07-28 17:30:24 +02:00
2019-10-23 23:24:33 +02:00
On top of switching the inputs, it is also able to condition the signal. It can
2019-07-28 17:30:24 +02:00
2019-10-23 23:24:33 +02:00
- Apply Bass-Boosting and Treble-Boosting (essentially a crappy 3-Point Equalizer)
- Amplify the input signal by up to 20dB
- Add attenuation to the individual channels (aka. balance the left and right channel)
2019-07-28 17:30:24 +02:00
2019-10-23 23:24:33 +02:00
All of these feature of the chip can be activated with the on-board STM32, which can in turn be controlled
with either on-board buttons or via it's integrated USB port. One can either use the serial protocol directly
or a [GUI written in python ](gui/README.md )
2019-10-21 13:09:09 +02:00
2019-10-23 23:24:33 +02:00
The Board can be supplied over said USB port as well (if the primary use-case implies it beeing connected
to the PC constantly) or by applying power using a 2.1mm Barrel Jack.
2019-10-21 13:09:09 +02:00
2019-10-23 23:24:33 +02:00
For more details on the pcb, check the [PCB readme ](kicad/README.md )
2019-10-21 13:09:09 +02:00
2019-10-23 23:24:33 +02:00
For details on the Serial command syntax and firmware flashing instructions, check the [firmware readme ](firmware/README.md )
2019-10-21 13:09:09 +02:00
2019-07-28 17:30:24 +02:00
2019-10-23 23:24:33 +02:00
# Why
Because ?
Sometimes you just need more inputs. This is how you do it.
2019-10-22 13:45:51 +02:00
