julixau
/
audioMux
1
0
Fork 0
Code Issues 3 Pull Requests Releases 1 Wiki Activity
audioMux/kicad
History
Julian Daube 4c8ca0246d readme: more broken link fixing 2019-10-23 23:42:34 +02:00
..
audioMux.pretty fix usb port; export gerber job 2019-10-22 13:36:27 +02:00
rohm.pretty first version 2019-07-28 17:29:32 +02:00
.gitignore add gitignore for kicad 2019-07-28 17:30:34 +02:00
Klinke.lbr first version 2019-07-28 17:29:32 +02:00
README.md readme: more broken link fixing 2019-10-23 23:42:34 +02:00
audioMux-cache.lib add signature; finished design 2019-07-28 20:14:02 +02:00
audioMux.kicad_pcb fix usb port; export gerber job 2019-10-22 13:36:27 +02:00
audioMux.kicad_wks add signature; finished design 2019-07-28 20:14:02 +02:00
audioMux.pro add signature; finished design 2019-07-28 20:14:02 +02:00
audioMux.sch add signature; finished design 2019-07-28 20:14:02 +02:00
audioMux_gerber_29_07_19.zip fix usb port; export gerber job 2019-10-22 13:36:27 +02:00
fp-lib-table first version 2019-07-28 17:29:32 +02:00
microcontroller.sch add signature; finished design 2019-07-28 20:14:02 +02:00
rohm.dcm first version 2019-07-28 17:29:32 +02:00
rohm.lib first version 2019-07-28 17:29:32 +02:00
sym-lib-table first version 2019-07-28 17:29:32 +02:00

README.md

THE PCB

There are a total of six solderjumpers on the board:

switching to the barrel jack as voltage supply

JP3 and JP4 set the source for the supply voltage. JP4 connects the voltage input to the barrel jack, JP4 connects it to the USB +5V rail.

Per Default JP4 is closed and JP3 is open, making the default way of supplying voltage the USB jack.

If the Barrel Jack should be used, then JP4 has to be opened first by cutting the trace which shorts it by default, otherwise the USB voltage will be shorted with the barrel jack, causing potential damage to the USB port. Afterwards, JP3 can be closed with a small blob of solder.

activating the equalizer

JP1 and JP2 connect the output of the Audio switching part of the Rohm chip. When left in the default setting, they will connect them to the output jack directly, bypassing the Equalisation part of the chip completely.

By selecting the other possible path, the equalisation circuit becomes usable. For this to work, JP7 and JP8 have to be closed with small solder blobs as well, since those connect the equalizers output to the output audio jack.

Assembling the rest

For assembly of the board, check the documentation folder. It contains the interactive bill of materials, which indicates what components go where.

Also take a look at the BOM for what components can be sourced where.